CHV100 close loop vector control inverter – biến tần đa năng INVT

0.75kW ~ 3000kW
380V / 480V / 660V / 690V / 1140V ± 15%

- Input VoltageRange:      1140/690/380/220V±15%
– Input FrequencyRange:   47~63Hz
– Output VoltageRange:     0~rated input voltage
– Output FrequencyRange:  0~600Hz

Product Description:

● Input & Output
- Input VoltageRange:      1140/690/380/220V±15%
– Input FrequencyRange:   47~63Hz
– Output VoltageRange:     0~rated input voltage
– Output FrequencyRange:  0~600Hz
● Main Control Function
– Control Mode: Sensorless vector control (SVC), Vector control with PG (VC), V/F control.
– Overload Capacity: 60s with 150% of rated current, 10s with 180% of rated current.
– Starting Torque: 150% of rated torque at 0.5Hz (SVC);
180% of rated torque at 0Hz(VC).
– Speed Adjusting Range: 1:100 (SVC); 1:1000 (VC)
– Speed Accuracy: ± 0.5% of maximum speed (SVC); ± 0.02% of maximum speed (VC)
– Carrier Frequency: 1.0kHz~16.0kHz.
– Frequency reference source: keypad, analog input, HDI, serial communication, multi-step speed, simple PLC and PID. The combination of multi- modes and the switch between different modes can be realized.
– Torque Control Function: Provide multiple torque setting source.
– PID Control Function
– Simple PLC or Multi-steps Speed Control: 16 steps speed can be set.
– Traverse Control Function
– Length and Time Control
– Non-Stop Function while instantaneous power failure
– Speed Trace Function: Smoothly start the running motor.
– QUICK/JOG Function: User defined shortcut key can be realized.
– Automatic Voltage Regulation (AVR): Automatically keep the output voltage stable when input voltage fluctuating
– Up to 29 fault protections: Protect from over current, over voltage, under voltage, over temperature, phase failure, over load etc.
● I/O Features
- Programmable Digital Input: Provide 5 terminals which can accept ON-OFF inputs, and 1 terminal which can accept high speed pulse input (HDI1). 4 inputs can be extended by I/O extension card.
– Programmable Analog Input: AI1 can accept input of 0 ~10V, AI2 can accept input of 0~10V or 0~20mA. AI3 (-10V~10V) and AI4 (0~10V or 0~20mA) can be extended by I/O extension card.
– Programmable Open Collector Output: Provide 1 output terminal. 1 output (open collector output or high speed pulse output) can be extended by I/O extension card.
– Relay Output: Provide 2 output terminals. 1 output can be extended by I/O extension card.
– Analog Output: Provide 1 output terminal, whose output scope can be 0/4~20 mA or 0~10 V, as chosen. 1 AO (0/4~20mA or 0/2~10V) can be extended by I/O card.